Monday, November 20, 2017

Engineers have developed a new and cost-effective catalyst to recycle two of the main causes behind climate change

Transforming greenhouse gases: New 'supercatalyst' to recycle carbon dioxide and methane


Engineers have developed a new and cost-effective catalyst to recycle two of the main causes behind climate change -- carbon dioxide (CO2) and methane (CH4).


The University of Surrey has developed a new and cost-effective catalyst to recycle two of the main causes behind climate change -- carbon dioxide (CO2) and methane (CH4).

In a study published by the Applied Catalysis B: Environmental, scientists have described how they created an advanced nickel-based catalyst strengthened with tin and ceria, and used it to transform CO2 and CH4 into a synthesis gas that can be used to produce fuels and a range of valuable chemicals.

The project is part of the Engineering and Physical Sciences Research Council's Global Research Project, which is looking into ways to lessen the impact of global warming in Latin America. The study has led the University of Surrey to file a patent for a family of new "supercatalysts" for chemical CO2 recycling.

According to the Global Carbon Project, global CO2 emissions are set to rise in 2017 for the first time in four years -- with carbon output growing on average three per cent every year since 2006.

While carbon capture technology is common, it can be expensive and, in most cases, requires extreme and precise conditions for the process to be successful. It is hoped the new catalyst will help make the technology more widely available across industry, and both easier and cheaper for it to be extracted from the atmosphere.

Dr Tomas R. Reina from the University of Surrey said: "This is an extremely exciting project and we believe we have achieved something here that can make a real impact on CO2 emissions.

"The goal we're all chasing as climate scientists is a way of reversing the impacts of harmful gases on our atmosphere -- this technology, which could see those harmful gases not only removed but converted into renewable fuels for use in poorer countries is the Holy Grail of climate science."

Professor Harvey Arellano-Garcia, Head of Research in the Chemical Engineering Department at the University of Surrey, said: "Utilising CO2 in this way is a viable alternative to traditional carbon capture methods, which could make a sizable impact to the health of our planet.

"We're now seeking the right partners from industry to take this technology and turn it into a world-changing process."

Story Source:

Materials provided by University of Surrey. Note: Content may be edited for style and length.

Journal Reference:

T. Stroud, T.J. Smith, E. Le Saché, J.L. Santos, M.A. Centeno, H. Arellano-Garcia, J.A. Odriozola, T.R. Reina. Chemical CO 2 recycling via dry and bi reforming of methane using Ni-Sn/Al 2 O 3 and Ni-Sn/CeO 2 -Al 2 O 3 catalysts. Applied Catalysis B: Environmental, 2018; 224: 125 DOI: 10.1016/j.apcatb.2017.10.047

The first successful use of infrared light to reduce water into hydrogen


Hydrogen fuel from water by harnessing red and near-infrared regions of sunlight


Scientists have synthesized a compound that absorbs near-infrared light to produce hydrogen from water. The compound contains three ruthenium atoms connected by an organic molecule. The absorbed light stimulates electrons to 'jump' into orbitals that do not exist in other, similar compounds. This is the first successful use of infrared light to reduce water into hydrogen, which can be used for energy conversion and storage, and other industrial purposes in a future sustainable energy society.

Hydrogen gas is a promising "green" fuel. The lightest chemical element, hydrogen is an efficient energy store and could potentially replace gasoline in vehicles. However, the element does not exist in large amounts in nature, and must be produced artificially.

Hydrogen can be produced by splitting water (H2O) into hydrogen (H2) and oxygen (O2). There are many ways to do this, but among the cleanest -- hence most attractive -- is using solar cells. These devices capture the energy of sunlight to drive the water-splitting reaction.

Sunlight comes in a spectrum, with each color having a different wavelength. Solar cells must absorb light of particular wavelengths, depending on how much energy the cell needs to drive the reaction. The more of the spectrum it captures, the more hydrogen it produces. Unfortunately, most cells only absorb shorter wavelengths of light, corresponding to the higher energy region of visible light below the red light domain. This means that while colors such as blue and green light can be used, the rest is wasted.

Now, researchers at Kyushu University in Japan and its Institute for Carbon-Neutral Energy Research (I2CNER) have potentially solved this problem. They invented a device driven by near-infrared (NIR) light -- the part of the spectrum, invisible to the naked eye, with wavelengths longer than visible red light. Thus, they enabled a broader spectrum of light, including UV, visible, and NIR, to be harvested. Their design cleverly exploits the chemistry of ruthenium, a heavy metal related to iron. Their achievement was reported in Angewandte Chemie International Edition.

Particular metal-organic hybrid materials are good at capturing light, which helps their electrons to "jump" into orbitals in the organic parts of the materials attached to the metal center. In solar cells, this is the first step in producing hydrogen, since electrons are the drivers of chemistry. However, the jump between orbitals is usually so big that only UV and the higher energy region of visible light have enough energy to stimulate it. Red, NIR, and even longer IR light are simply reflected back or pass through the devices, and their energy remains unused.

The Kyushu design is different. "We introduced new electron orbitals into the ruthenium atoms," study corresponding author Professor Ken Sakai explains. "It's like adding rungs to a ladder -- now the electrons in ruthenium don't have so far to jump, so they can use lower energies of light such as red and NIR. This nearly doubles the amount of sunlight photons we can harvest."

The trick is to use an organic compound -- hexagonal rings of carbon and nitrogen -- to link three metal atoms into a single molecule. In fact, this not only creates these new "rungs" -- hence the ability to use red and NIR light -- but also makes the reaction more efficient due to spatial expansion of the light harvesting part of the molecule. Thus, the production of hydrogen is accelerated.

"It's taken decades of efforts worldwide, but we've finally managed to drive water reduction to evolve H2 using NIR," Sakai says. "We hope this is just the beginning -- the more we understand the chemistry, the better we can design devices to make clean, hydrogen-based energy storage a commercial reality."

Story Source:
Source: Kyushu University, I2CNER

Materials provided by Kyushu University, I2CNER. Note: Content may be edited for style and length.

Journal Reference:

Yutaro Tsuji, Keiya Yamamoto, Kosei Yamauchi, Ken Sakai. Near-Infrared Light-Driven Hydrogen Evolution from Water Using a Polypyridyl Triruthenium Photosensitizer. Angewandte Chemie International Edition, 2017; DOI: 10.1002/anie.201708996

Wednesday, November 15, 2017

New types of cellulases, enzymes help break down plants can be used to make biofuels


To find new biofuel enzymes, it can take a microbial village, New source of robust cellulases in compost


A new study led by researchers at the Department of Energy's Joint BioEnergy Institute (JBEI), based at Lawrence Berkeley National Laboratory (Berkeley Lab), demonstrates the importance of microbial communities as a source of stable enzymes that could be used to convert plants to biofuels.

The study, recently published in the journal Nature Microbiology, reports on the discovery of new types of cellulases, enzymes that help break down plants into ingredients that can be used to make biofuels and bioproducts. The cellulases were cultured from a microbiome. Using a microbial community veers from the approach typically taken of using isolated organisms to obtain enzymes.

The scientists first studied the microbial menagerie present in a few cups of municipal compost. Metagenomic analysis at the DOE Joint Genome Institute (JGI) of the microbiome helped reveal that 70 percent of the enzymatic activity originated from cellulases produced by a cluster of uncultivated bacteria in the compost. They found that the enzymes easily broke down the cellulose in plant biomass into glucose at temperatures up to 80 degrees Celsius.





"Here we're cultivating an entire community of microbes to access enzymes that we couldn't get from isolates," said study principal investigator Steve Singer, senior scientist in Berkeley Lab's Biological Systems and Engineering Division and director of Microbial and Enzyme Discovery at JBEI. "Some microbes are difficult to culture in a lab. We are cultivating microbes living in communities, as they occur in the wild, which allows us to see things we don't see when they are isolated. This opens up the opportunity to discover new types of enzymes that are only produced by microbes in communities."

The bacterial population, Candidatus Reconcilibacillus cellulovorans, yielded cellulases that were arranged in remarkably robust carbohydrate-protein complexes, a structure never before observed in isolates. The stability of the new cellulase complexes makes them attractive for applications in biofuels production, the study authors said.

"The enzymes persist, even after a decline in bacterial abundance," said Singer, who compared the microbial community with sourdough starters fermented from wild yeast and friendly bacteria. "We kept the microbial community cultivation going for more than three years in the lab."

This stability is a key advantage over other cellulases that degrade more rapidly at high temperature, the researchers said.

Story Source:

Materials provided by DOE/Lawrence Berkeley National Laboratory.

Tuesday, November 14, 2017

Global carbon emissions are on the rise again in 2017


Global carbon emissions are on the rise again in 2017 after three years of little-to-no growth, according to researchers at the University of East Anglia and the Global Carbon Project.

It was previously hoped that emissions might soon reach their peak after three stable years, so the new projection for 2017 is an unwelcome message for policy makers and delegates at the UN Climate Change Conference (COP 23) in Bonn this week.

The research, published today simultaneously in the journals Nature Climate Change, Earth System Science Data Discussions and Environmental Research Letters, reveals that global emissions from all human activities will reach 41 billion tonnes in 2017, following a projected 2% rise in burning fossil fuels.

The figures point to China as the main cause of the renewed growth in fossil emissions – with a projected growth of 3.5%.

CO2 emissions are expected to decline by 0.4% in the US and 0.2% in the EU, smaller declines than during the previous decade.

Increases in coal use in China and the US are expected this year, reversing their decreases since 2013.

Lead researcher Prof Corinne Le Quéré, director of the Tyndall Centre for Climate Change Research at UEA, said: “Global CO2 emissions appear to be going up strongly once again after a three year stable period. This is very disappointing.

“With global CO2 emissions from human activities estimated at 41 billion tonnes for 2017, time is running out on our ability to keep warming well below 2ºC let alone 1.5ºC.

“This year we have seen how climate change can amplify the impacts of hurricanes with more intense rainfall, higher sea levels and warmer ocean conditions favouring more powerful storms. This is a window into the future. We need to reach a peak in global emissions in the next few years and drive emissions down rapidly afterwards to address climate change and limit its impacts.”

Key findings:

  • In 2017, CO2 emissions from fossil fuels and industry are projected to grow by 2% (0.8% to 3%). This follows three years of nearly no growth (2014-2016). (GDP to rise 3.6% according to IMF figures).
  • Global CO2 emissions from all human activities are set to reach 41 billion tonnes (41 Gt CO2) by the end of 2017. Meanwhile emissions from fossil fuels are set to reach 37 Gt CO2 – a record high.
  • China’s emissions are projected to grow by 3.5% (0.7% to 5.4%), driven by a rise in coal consumption (GDP up 6.8%).
  • India’s emissions are projected to grow by just 2% (0.2% to 3.8%) – down from over 6% per year during the last decade (GDP up 6.7%).
  • US emissions are projected to decline by -0.4%(-2.7% to +1.9%), with coal consumption projected to rise slightly (GDP up 2.2%).
  • EU emissions are tentatively projected to decline -0.2% (-2% to +1.6%), a smaller decline than the previous decade (GDP up 2.3%).
  • CO2 emissions decreased in the presence of growing economic activity in 22 countries representing 20% of global emissions.
  • Renewable energy has increased rapidly at 14% per year over the last five years – albeit from a very low base.
  • Atmospheric CO2 concentration reached 403 parts per million in 2016, and is expected to increase by 2.5 ppm in 2017.


Dr Glen Peters of the CICERO Center for International Climate Research in Oslo who led one of the studies said: “The return to growth in global emissions in 2017 is largely due to growth in Chinese emissions, projected to grow by 3.5% in 2017 after two years with declining emissions. The use of coal, the main fuel source in China, may rise by 3% due to stronger growth in industrial production and lower hydro-power generation due to less rainfall.”

“The growth in 2017 emissions is unwelcome news, but it is too early to say whether it is a one-off event on a way to a global peak in emissions, or the start of a new period with upward pressure on global emissions growth.”

The team flags that persistent uncertainties exist in our ability to estimate recent changes in emissions, particularly when there are unexpected changes as in the last few years.

“Even though we may detect a change in emission trend early, it may take as much as 10 years to confidently and independently verify a sustained change in emissions using measurements of atmospheric concentrations of carbon dioxide,” said Dr Peters.

“Policy makers in Bonn are preparing for the Global Stocktake under the Paris Agreement, that will start in 2018 and occur every five years, and this puts immense pressure on the scientific community to develop methods and perform measurements that can truly verify changes in emissions within this five-yearly cycle,” said Prof Le Quéré.

Sunday, November 5, 2017

Highly transparent solar cells represent the wave of the future for new solar applications


TRANSPARENT SOLAR TECHNOLOGY REPRESENTS 'WAVE OF THE FUTURE'


See-through solar materials that can be applied to windows represent a massive source of untapped energy and could harvest as much power as bigger, bulkier rooftop solar units, scientists report today in Nature Energy.

Led by engineering researchers at Michigan State University, the authors argue that widespread use of such highly transparent solar applications, together with the rooftop units, could nearly meet U.S. electricity demand and drastically reduce the use of fossil fuels.

“Highly transparent solar cells represent the wave of the future for new solar applications,” said Richard Lunt, the Johansen Crosby Endowed Associate Professor of Chemical Engineering and Materials Science at MSU. “We analyzed their potential and show that by harvesting only invisible light, these devices can provide a similar electricity-generation potential as rooftop solar while providing additional functionality to enhance the efficiency of buildings, automobiles and mobile electronics.”



Lunt and colleagues at MSU pioneered the development of a transparent luminescent solar concentrator that when placed on a window creates solar energy without disrupting the view. The thin, plastic-like material can be used on buildings, car windows, cell phones or other devices with a clear surface.

The solar-harvesting system uses organic molecules developed by Lunt and his team to absorb invisible wavelengths of sunlight. The researchers can “tune” these materials to pick up just the ultraviolet and the near-infrared wavelengths that then convert this energy into electricity (watch a demonstration of the process here).

Moving global energy consumption away from fossil fuels will require such innovative and cost-effective renewable energy technologies. Only about 1.5 percent of electricity demand in the United States and globally is produced by solar power.

But in terms of overall electricity potential, the authors note that there is an estimated 5 billion to 7 billion square meters of glass surface in the United States. And with that much glass to cover, transparent solar technologies have the potential of supplying some 40 percent of energy demand in the U.S. – about the same potential as rooftop solar units. “The complimentary deployment of both technologies,” Lunt said, “could get us close to 100 percent of our demand if we also improve energy storage.”

Lunt said highly transparent solar applications are recording efficiencies above 5 percent, while traditional solar panels typically are about 15 percent to 18 percent efficient. Although transparent solar technologies will never be more efficient at converting solar energy to electricity than their opaque counterparts, they can get close and offer the potential to be applied to a lot more additional surface area, he said.

Right now, transparent solar technologies are only at about a third of their realistic overall potential, Lunt added.

“That is what we are working towards,” he said. “Traditional solar applications have been actively researched for over five decades, yet we have only been working on these highly transparent solar cells for about five years. Ultimately, this technology offers a promising route to inexpensive, widespread solar adoption on small and large surfaces that were previously inaccessible.”


The work is funded by the National Science Foundation and the U.S. Department of Education.

Lunt’s coauthors are Christopher Traverse, a doctoral student in engineering at MSU, and Richa Pandey and Miles Barr with Ubiquitous Energy Inc., a company Lunt cofounded with Barr to commercialize transparent solar technologies.

Resource : http://msutoday.msu.edu/news/2017


NREL, Scientists Elevate Quantum Dot Solar Cell World Record to 13.4 %

NREL, Scientists Elevate Quantum Dot Solar Cell World Record to 13.4 %


October 27, 2017
Researchers at the U.S. Department of Energy’s (DOE) National Renewable Energy Laboratory (NREL) established a new world efficiency record for quantum dot solar cells, at 13.4 percent.

Colloidal quantum dots are electronic materials and because of their astonishingly small size (typically 3-20 nanometers in dimension) they possess fascinating optical properties. Quantum dot solar cells emerged in 2010 as the newest technology on an NREL chart that tracks research efforts to convert sunlight to electricity with increasing efficiency.

The initial lead sulfide quantum dot solar cells had an efficiency of 2.9 percent. Since then, improvements have pushed that number into double digits for lead sulfide reaching a record of 12 percent set last year by the University of Toronto. The improvement from the initial efficiency to the previous record came from better understanding of the connectivity between individual quantum dots, better overall device structures and reducing defects in quantum dots.

The latest development in quantum dot solar cells comes from a completely different quantum dot material. The new quantum dot leader is cesium lead triiodide (CsPbI3), and is within the recently emerging family of halide perovskite materials. In quantum dot form, CsPbI3 produces an exceptionally large voltage (about 1.2 volts) at open circuit.
“This voltage, coupled with the material’s bandgap, makes them an ideal candidate for the top layer in a multijunction solar cell,” said Joseph Luther, a senior scientist and project leader in the Chemical Materials and Nanoscience team at NREL. The top cell must be highly efficient but transparent at longer wavelengths to allow that portion of sunlight to reach lower layers. Tandem cells can deliver a higher efficiency than conventional silicon solar panels that dominate today’s solar market.
This latest advance, titled “Enhanced mobility CsPbI3 quantum dot arrays for record-efficiency, high-voltage photovoltaic cells,” is published in Science Advances. The paper was co-authored by Erin Sanehira, Ashley Marshall, Jeffrey Christians, Steven Harvey, Peter Ciesielski, Lance Wheeler, Philip Schulz, and Matthew Beard, all from NREL; and Lih Lin from the University of Washington.
The multijunction approach is often used for space applications where high efficiency is more critical than the cost to make a solar module. The quantum dot perovskite materials developed by Luther and the NREL/University of Washington team could be paired with cheap thin-film perovskite materials to achieve similar high efficiency as demonstrated for space solar cells, but built at even lower costs than silicon technology--making them an ideal technology for both terrestrial and space applications.
“Often, the materials used in space and rooftop applications are totally different. It is exciting to see possible configurations that could be used for both situations,” said Erin Sanehira a doctoral student at the University of Washington who conducted research at NREL.
The NREL research was funded by DOE’s Office of Science, while Sanehira and Lin acknowledge a NASA space technology fellowship.
NREL is the U.S. Department of Energy's primary national laboratory for renewable energy and energy efficiency research and development. NREL is operated for the Energy Department by The Alliance for Sustainable Energy, LLC.

Story Source: www.nrel.gov/news/press/2017/